Sale! Out of Stock

Bitmain APW7 mining power supply with 10 plugs

$99.00  /  0.00149 Ƀ

SKU: BLO-BIPS-APW710 Category: Tags: , , , ,

The power cord is not included, please find one with at least 10A from your local market.

  • Includes ten 6-pin PCIe connectors
  • Maximum output: 1000W @ 110v-120v, 1800W @ 220v-240v
  • Power cord not included, requires standard PC power cable (C13)
  • Click Here for Manufacturer Warranty information

Part Number / SKU: BLO-BIPS-APW710

Out of stock

Join the waitlist to be emailed when this product becomes available

The power cord is not included, please find one with at least 10A from your local market.

The APW7 can deliver a maximum power of only 1000W if it is connected to a 110V mains power supply. To obtain the rated power of 1800W, the APW7 must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.

This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer.

This Bitmain Power Supply was intended to be an AntMiner Power Supply and works with: AntMiner S9I, AntMiner S9 and all previous AntMiner models as well as the Avalon 841, 821 etc. It can be used as a power supply for GPU mining and will support up to 5 cards that use 2x 8 Pin Connectors for power and is one of the best power supplies for mining.

Weight 6 lbs
Dimensions 13 × 7 × 5 in
Output - DC Voltage

12.0V

Output - Rated Current(220V input)

150A

Output - Rated Current(110V input)

83.3A

Output - Rated Power(220V input)

1800W

Output - Rated Power(110V input)

1000W

Output - Ripple & Noise

<1%

Output - Voltage Regulation

<2%

Output - Source Regulation

<1%

Output - Load Regulation

<1%

Output - Setup, Rise Time

<2S

Output - Power off Protection Trip Time

>10mS

Output - Interface Type

5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)

Output - Noise Level

<43DB

Input - Voltage Range

100-264V AC

Input - Starting Voltage

95-105V AC

Input - Frequency Range

47-63Hz

Input - Power Factor

>0.99 (full load)

Input - Leakage Current

<1.5mA (220V 50Hz)

Protection - Low-voltage Input

80-89V AC

Protection - Output Short Circuit

Yes

Protection - Output Overcurrent

150-200A max.

Protection - Overheat Protection

Yes

Environment Conditions - Operating Temperature

-20°C – 60°C

Environment Conditions - Operating Humidity

20% – 90% relative humidity (non-condensing)

Dimensions

206mm*110mm*62mm

Cooling Fan

Forced-air cooling

Reviews

There are no reviews yet.

Be the first to review “Bitmain APW7 mining power supply with 10 plugs”